Zaptec Go 2 22 kW MID + Zaptec Sense P1 + Complete Installation

Fully installed for €1,500 incl. VAT

Choose smart, safe and future-ready home charging with the Zaptec Go 2. For €1,500 including VAT, JML eplus supplies and installs a complete EV charging solution, including dynamic load balancing, modifications to the distribution board and up to 10 metres of cabling.

There is no need to source separate components or arrange different contractors. JML eplus takes care of the complete process, from supply and installation through to configuration and commissioning.

Installation is available throughout the Netherlands.

Not sure whether your property is suitable? We can visit you free of charge and without obligation to assess your situation.

---

What is included for €1,500 incl. VAT?

The standard installation package includes:

• Zaptec Go 2 EV charger – up to 22 kW
• Zaptec Sense P1 for dynamic load balancing
• Modification and connection within the distribution board
• Up to 10 metres of suitable power cable
• Required standard installation materials
• Mounting and connection of the EV charger
• Connection and configuration of the Zaptec Sense P1
• Configuration and commissioning of the charging system
• Inspection and testing of the installation
• Travel costs within the Netherlands
• 2-year warranty on installation work carried out by JML eplus
• Free, no-obligation site assessment if you are unsure whether your property is suitable

If your property requires additional work, such as extra cabling, groundworks, a complex cable route or more extensive modifications to the distribution board, we will always discuss this with you in advance.

This means you know exactly what to expect before any additional work is carried out.

---

Why choose the Zaptec Go 2?

The Zaptec Go 2 combines compact Scandinavian design with intelligent charging technology and charging power of up to 22 kW.

It is suitable for both fully electric and plug-in hybrid vehicles with a Type 2 connection and can be configured according to the available electrical capacity of your home and vehicle.

Up to 22 kW charging power

The Zaptec Go 2 supports charging at up to 22 kW on a three-phase electrical supply.

The actual charging speed depends on factors including:

• your property’s electrical connection;
• your vehicle’s onboard charger;
• the available electrical capacity;
• and the configuration of the charging installation.

Even if your vehicle can charge at a maximum of 11 kW, the Zaptec Go 2 can still be installed and used perfectly well.

---

MID-certified energy metering

The Zaptec Go 2 features a MID-certified energy meter.

This allows the energy used during charging sessions to be accurately recorded. This can be particularly useful when charging costs need to be monitored, reimbursed or allocated.

---

Dynamic load balancing with Zaptec Sense P1

Zaptec Sense P1 is included as part of this installation package.

Zaptec Sense monitors your property’s electricity consumption in real time and helps prevent your electrical connection from becoming overloaded.

When equipment such as your:

• heat pump;
• induction hob;
• oven;
• washing machine;
• tumble dryer;
• or other electrical appliances

is using a significant amount of power, the available charging power can automatically be adjusted.

When electricity consumption in the property decreases again, more capacity can become available for charging your vehicle.

This allows the available electrical capacity of your property to be distributed intelligently and efficiently.

---

Smart charging with solar panels and home battery systems

The Zaptec Go 2 is an excellent choice for homes equipped with solar panels and home battery systems, allowing your EV charging installation to form part of a modern home energy setup.

Charge using your own solar energy

When combined with Zaptec Sense P1, the charging system can take your property’s electricity consumption and available energy into account.

For compatible installations, this allows the Zaptec Go 2 to make better use of surplus electricity generated by your solar panels, helping you charge your vehicle using more of your own renewable energy and reduce the amount of electricity drawn from the grid.

This is particularly useful during periods when your solar panels are generating more electricity than your home is consuming.

Suitable for homes with battery storage

The Zaptec Go 2 can also be installed in homes with a home battery or energy storage system.

Your EV charger, solar panels and home battery can operate alongside each other as part of your property’s overall electrical and energy-management system.

The exact way in which solar generation, battery storage and EV charging interact will depend on your existing equipment, electrical installation and energy-management configuration.

If you already have solar panels or a home battery, JML eplus can assess your existing installation and configure the EV charging solution accordingly.

Make better use of your own energy

Combining EV charging with solar generation and home energy storage can help you:

• Make better use of electricity generated by your solar panels
• Reduce unnecessary electricity consumption from the grid
• Charge your EV when renewable energy is available
• Balance EV charging with other household electrical loads
• Integrate EV charging into a modern home energy system
• Prepare your home for future developments in smart energy management

Already have solar panels or a home battery? Let us know when requesting your installation so we can assess the complete electrical setup and recommend the most suitable configuration.

---

Smart charging with the Zaptec app

The Zaptec app allows you to manage your EV charger easily.

Depending on the available features and configuration, you can monitor your charging sessions and manage the use of your charging point.

The Zaptec Go 2 offers modern connectivity options for communication and intelligent charging management.

---

Compact and modern design

The Zaptec Go 2 has a compact design that fits equally well with both modern and traditional properties.

Depending on your situation, the charger can be installed on:

• an external wall;
• a garage;
• a carport;
• or a suitable charging pedestal.

During the installation, we will work with you to determine the most practical and neat location for the charger.

---

Professional installation by JML eplus

An EV charger is a high-power electrical installation. Correct installation is therefore essential for safe and reliable operation.

JML eplus provides the complete installation and tailors it to:

• your electrical supply;
• your distribution board;
• the available electrical capacity;
• the location of the charger;
• the cable route;
• your vehicle;
• and your charging requirements.

We work in accordance with the applicable electrical standards and provide a professional, neat and reliable installation.

JML eplus

• Zaptec certified
• VCA-VOL certified
• NEN 3140 certified
• Installations carried out in accordance with the applicable requirements of NEN 1010
• Professional electrical installation work
• Installation throughout the Netherlands
• 2-year warranty on our installation work
• Free, no-obligation site assessment available

---

Warranty

5-year manufacturer’s warranty on the Zaptec Go 2

The Zaptec Go 2 is covered by the 5-year manufacturer’s warranty from Zaptec, subject to the manufacturer’s applicable warranty terms and conditions.

2-year installation warranty from JML eplus

In addition, you receive a 2-year warranty on installation work carried out by JML eplus.

This gives you added peace of mind for both the product and the professional installation.

---

Already have an EV charger and want to replace it?

Do you already have an EV charger and want to replace it with a Zaptec Go 2?

If the existing:

• power cable;
• electrical protection;
• distribution board connection;
• cable route;
• and other electrical installation components

are still suitable, it may not be necessary to carry out all of the installation work again.

In this case, we may be able to offer a discount on the installation costs and provide you with a reduced, tailored price.

Contact us and, if possible, send us a few photographs of:

1. your existing EV charger;
2. the existing cabling, if visible;
3. your distribution board.

We can then assess what can be reused and determine what additional work, if any, is required.

Contact us for a free assessment and a tailored replacement price.

---

Standard installation with up to 10 metres of cable

The total price of €1,500 incl. VAT is based on a standard installation with up to 10 metres of cabling and the work included within the standard installation package.

Every property is different. If, for example:

• more than 10 metres of cable is required;
• cables need to be routed through several rooms or areas;
• excavation or groundworks are required;
• paving needs to be lifted;
• specialist wall or floor penetrations are required;
• more extensive modifications to the distribution board are necessary;
• or other additional work is required,

we will discuss this with you in advance.

No additional work will be carried out without first agreeing the requirements and costs with you.

---

Free, no-obligation site assessment

Not sure whether your property or electrical installation is suitable?

No problem. You can send us photographs of your distribution board and the intended location of the EV charger. In many cases, this allows us to carry out a good initial assessment remotely.

Would you prefer us to inspect the situation in person?

JML eplus can visit your property free of charge and without obligation to assess the installation requirements.

During the site assessment, we can look at:

• your distribution board and electrical supply;
• the available electrical capacity;
• the best location for the EV charger;
• the possible cable route;
• the required cable length;
• any additional installation work;
• and, where applicable, which parts of an existing charging installation can be reused.

Following the assessment, we can clearly explain what is required for a safe and professional installation and whether the standard €1,500 incl. VAT installation package applies to your situation.

The site assessment is completely free and without obligation. You are under no obligation to proceed with an installation afterwards.

Contact JML eplus to arrange your free site assessment.

---

Installation throughout the Netherlands

JML eplus supplies and installs EV charging solutions throughout the Netherlands for both residential and business customers.

Whether you need a completely new charging installation or want to replace an existing EV charger, we will be happy to assess your requirements and recommend the most suitable solution.

---

Is the Zaptec Go 2 suitable for your home?

Not sure whether your distribution board or electrical supply is suitable for an EV charger?

We will be happy to check this for you.

Send us photographs of your distribution board and let us know where you would like the EV charger installed. Based on this information, we can carry out an initial assessment of your situation.

If this is not sufficient, or if you would prefer the reassurance of an on-site assessment, we can arrange a free, no-obligation site visit.

---

Ready for smart home charging?

Choose a complete EV charging solution including:

Zaptec Go 2 + Zaptec Sense P1 + distribution board modification + up to 10 metres of cabling + professional installation

€1,500 incl. VAT

Including installation throughout the Netherlands and a 2-year warranty on our installation work.

Already have an existing EV charging installation? Contact us for a tailored replacement price.

Not sure whether your property, distribution board or cable route is suitable? Take advantage of our free, no-obligation site assessment.

Contact JML eplus for advice, an installation assessment or a quotation.

JML eplus – smart, safe and professional EV charging.